28
Lower Auger Assembly
Description Part No.
1 Bottom Tube Liner X-Tended Reach (1012, 1112, 1122, 1222) JM0037362
2 S-Cap Yellow - 1/2” ID x 1-1/4” x 0.065” (REC-1) JM0016842
3 20” Lower Flighting Turbo (1012, 1112, 1122, 1222) JM0035010
4 1/2” Gate Indicator Rod (104” Rod Length) (1012, 1112, 1122, 1222) JM0027918
5 2” x 36” Hydraulic Cylinder (JD236) JM0018523
6 1/2”-13 Gr5 Z Centerlock Hex Nut JM0001511
7 1/2” -13 x 1-1/4” Gr5 Z Hex Bolt JM0001513
8 Spline Coupler 3” x 2” ID x 3-3/4” OD (for 22” ighting)(SC-334X3) JM0009701
9 2” Output Shaft Gearbox Spline Washer (3” OD) JM0020638
10 1” x 3” Clevis Pin with Cotter Pins JM0019407
11 1”-8 Gr5 Z Centerlock Hex Nut JM0002149
12 1”-8 x 6” Gr5 Z Hex Bolt JM0002111
13 Drive Dog Weldment, 2 1/2” ID (18” & 20”) (DDW-21218) JM0000093
14 1/2” Gr2 Z Lock Washer JM0019021
15 Hanger Bushing Assembly (20”) (HBA-20) JM0019655
16 2-1/2” ID Bronze Bushing (BB-212) JM0016841
17 M5- 4/5 x 12 Gr8.8 Z Hex Bolt JM0036046
18 Limit Switch for Field Light (ME-8111) JM0036040
19 Feed Gate Assembly for 12 Series Carts (1012 & Up) JM0048539
To Next Page
Loading...
