J&M 1012 - Inspection Windows; Door Wheel Assembly

44
Description Part No.
1 1/4”-20 x 1” Gr5 Z Hex Bolt JM0002095
2 1/4” ID, 3/4” OD Z Flat Washer JM0003090
3 .754 ID x .874 OD x .625 LG Bronze Bushing (BB-34) JM0009455
4 Nylon Guided Rack Housing Weldment JM0030635
5 3/8”-16 x 1-1/4” Gr5 Z Hex Bolt JM0016675
6 3/8”-16 Gr5 Z Hex Nut JM0001707
7 Scrubber Spring Plate (ST Manual Door) (Door Wheel) JM0002851
8 Compression Spring (1” x 1-3/4”) for Door Assembly & Tongue Latch JM0001688
9 Nylon Track Guide For Door Wheel JM0029354
10 Flip Lock For Door Rack JM0029459
11 Keyway Washer for Door Rack JM0029454
12 15 Tooth Sprocket - 3/4” Bore w/ Key JM0029455
13 Rack Track Weldment for Door (27-1/2”) JM0030634
14 Rack Wheel Weldment JM0028897
15 Stub Shaft 3/4” x 4 1/8” w/ Threaded End JM0029440
16 3/8”-16 x 1-3/4” Gr5 Z Hex Bolt JM0002097
17 1/4”-20 Gr5 Z Centerlock Hex Nut JM0001505
18 Complete Door Wheel Assembly (27-1/2”) (2016 & Newer) JM0029460
Door Wheel Assembly (2016 & Newer)
Inspection Windows
7
Description Part No.
1 3/8”-16 Gr5 Z Centerlock Hex Nut JM0001512
2 Inside Window Clip - Deep JM0000253
3 Outside Window Clip - Shallow JM0000256
4 3/8”-16 x 3/4” Gr5 Z Hex Bolt JM0001663
5 Window Seal 3/4” ‘S’ Strip JM0000254
6 Standard Inspection Window JM0000255
7 Inspection Window Kit JM0025752