janitza UMG 96RM-CBM Manual

14
UMG 96RM-P/-CBM
LED status bar
The different statuses of the inputs and outputs are
displayed via the LED status bar on the rear of the device.
Digital inputs
The LED associated with the respective input illuminates
green if there is a signal of at least 1mA flowing through
the interface.
Digital outputs
The LED associated with the respective output
illuminates green if the output is active - independent of
whether there is a connection on the interface.
Profibus (only UMG 96RM-P variant)
The LED associated with the Profibus provides
comprehensive information by means of a red or green
illumination and a flashing frequency, in accordance with
table 5.1.
Digital output 3
Digital output 4
Digital output 5
Digital output 6
Profibus (only -P model)
Digital input 1
Digital input 2
Digital input 3
Digital input 4
LED status bar
Fig. LED status bar for inputs and outputs

janitza UMG 96RM-CBM Specifications

General

Brand	janitza
Model	UMG 96RM-CBM
Category	Measuring Instruments
Language	English