janitza UMG 96RM-CBM Manual

38
UMG 96RM-P/-CBM
Procedure in the event of faults
Possible fault Cause Remedy
No display See instructions for basic device
No current display See instructions for basic device
Current displayed is too large or
too small.
See instructions for basic device
Voltage displayed is too large or
too small.
See instructions for basic device
Voltage displayed is too small. See instructions for basic device
Phase shift ind/cap. See instructions for basic device
Effective power too large or too
small.
See instructions for basic device
Effective power, draw/supply
transposed.
See instructions for basic device
An output is not reacting. See instructions for basic device
"EEE" in the display See instructions for basic device
"EEE bAt" in the display Battery capacity is too low See "Battery monitoring function"
and "Replacing the battery"
No connection to device. Incorrect device address Correct device address.
Different bus speeds (baud rate) Correct speed (baud rate)
Incorrect protocol. Correct protocol.
Termination missing. Terminate bus with termination
resistor.

janitza UMG 96RM-CBM Specifications

General

Brand	janitza
Model	UMG 96RM-CBM
Category	Measuring Instruments
Language	English