To Next PageTo Next Page
Need help?Do you have a question about the janitza UMG 604 and is the answer not in the manual?
General| Measurement Category | CAT III 600 V |
|---|---|
| Mounting Type | DIN Rail |
| Voltage Measurement | Yes |
| Current Measurement | Yes |
| Frequency Measurement Range | 45-65 Hz |
| Power Measurement | Yes |
| Energy Measurement | Yes |
| Harmonics Analysis | Yes |
| Communication Interfaces | Yes |
| Display | LCD |
| Operating Temperature | -10 to +55 °C |
| Storage Temperature | -20 to +70 °C |
| Device Type | Power Analyzer |
| Harmonics | Up to 50th |
| Communication Interface | RS-485 |
| Protocols | Modbus RTU |
| Accuracy Class | 0.5S |
Information regarding trademarks and their rights.
Explains pictograms and symbols used in the manual.
Checks for device condition, supply, and accessories.
UMG604 applications, specifications, and functionalities.
How the device performs measurements.
Different interaction methods for the UMG604.
Software for programming and data acquisition.
Navigating the device display.
Using the device's programming interface.
Setting and using device and homepage passwords.
UMG604 application in 4-wire and 3-wire systems.
Mounting, position, and power supply requirements.
Device operation using keys, display, and programming modes.
Connecting and performing current measurements.
Using ammeters and summing current transformers.
Measuring currents directly without transformers.
Serial interfaces, their setup, and cable shielding.
Network bus topology, Profibus, and Ethernet details.
Specifications and connections for digital outputs.
Specifications and connections for digital inputs.
Connecting S0 pulse generators.
Steps for initial power-up and voltage connection.
Verifying voltage, current, phase sequence, and energy measurements.
Setting transformer ratios and connection options.
Data recording, overrange, serial number, firmware, date, time.
Repair, disposal, updates, and contact info.
Dimensions, operating conditions, transport.
Power, protection, I/O, temp. input, uncertainty.
Steps to set primary current.
Entering, changing, and exiting programming mode.
