Janome 4120QDC - Clasp Stitch; Fagoting; Satin Stitches

JanomeFlyer.com
45
Fagoting
q Stitch pattern: Mode 3: 45
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
* Stitch patterns 46 in mode 3 can also be used.
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 5/8˝ (1.5 cm) and press. Pin
the two edges to paper or tear away backing 1/8˝ (0.3 to
0.4 cm) apart. Sew slowly, guiding the fabric so the needle
catches the folded edge on each side.
After nishing the sewing, tear away the paper.
q 1/8˝ (0.3 to 0.4 cm)
w Paper
q
w
Satin Stitches
q Stitch pattern: Mode 3: 65
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
Custom crafted zigzag foot F2
* Stitch patterns 59 to 66 in mode 3 can also be used.
For better sewing results, stabilizer should be used on
the wrong side of the fabric when you use stretch or
elastic fabrics.
Press the auto-lock button to nish the end of the pattern.
q
ew
q
ew
q
ew
Clasp Stitch
q Stitch pattern: Mode 3: 22
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
You can secure quilt layers and batting using the clasp
stitch.
z Select stitch pattern 22 (mode 3). Press the memory
key.
x Select stitch pattern 92 (mode 3). Press the memory
key.
c Start sewing. The machine will automatically stop
after sewing one unit of the pattern.
Janome 4120QDC Sewing Machine Instruction Manual
www.janomeflyer.com
4120QDC Owners Manual/ User Guide