6
w
q
r
e
w Reverse stitch button
Press and hold the reverse stitch button w to sew in
reverse.
Release the button w to sew forward.
Press and hold the button w when the machine is
stopped and foot control is disconnected to sew in
reverse slowly.
Release the button w to stop the machine.
Any other stitches except in mode 1 and 2
Press the reverse stitch button w to sew a locking
stitch immediately. The machine will automatically stop.
in mode 1, 2
Please refer to pages 24, 40 and 41.
e Auto-lock button
Press the auto-lock button e to sew a locking stitch
immediately. The machine will automatically stops.
Any other stitches
Press the auto-lock button e to sew a locking
stitch at the end of current pattern. The machine will
automatically stop.
q Start/Stop button
Lower the presser foot lifter.
Press the start/stop button q to start the machine.
The machine starts running slowly for the rst few
stitches; it then runs at the speed set by the speed
control slider.
Press the start/stop button q again to stop the
machine.
NOTES:
• The machine runs slowly as long as you press and
hold the start/stop button q.
• The start/stop button q cannot be used when the
foot control is connected to the machine.
• The machine will not run and the presser foot
mark r will blink if you start the machine with the
presser foot in the up position. Lower the presser
foot and press the start/stop button.
in mode 1 and 2, in mode 3
in mode 1 and 2, in mode 3
Machine Operating Buttons
Janome 4120QDC Sewing Machine Instruction Manual
4120QDC Owners Manual/ User Guide
To Next Page
Loading...
