62
Audible signal
Pip
Pip-pip-pip
Pip-pip-peep
Peep
The buzzer sounds when:
Normal operation
Invalid operation
Buttonhole sewing completed
Malfunction
Problems and Warning Signs
Cause Try this
The machine will not sew with the start/stop
button because the foot control is connected.
Disconnect the foot control
and start the machine.
Warning sign
Lower the buttonhole lever
and restart the machine.
A buttonhole is sewn without lowering the
buttonhole lever.
The bobbin winder spindle is moved to the right.
Move the bobbin winder
spindle to the left.
The machine is restarted too soon after it has
halted due to the overload.
Wait for at least 15 seconds
to restart. If threads are
jamming, remove the
jammed threads.
Auto thread cutting error due to a problem in
the electronic components or tangled in hook
area.
Remove the jammed
threads in the hook area.
If the error occurs again
after cleaning the hook area,
contact the service center
or the store from where the
machine was purchased.
The machine will not sew because the presser
foot is not lowered.
Lower the presser foot lifter
and restart the machine.
Janome 4120QDC Sewing Machine Instruction Manual
4120QDC Owners Manual/ User Guide
To Next Page
Loading...
