12
q
q
q
w
e
w
w
e
Bobbin Winding
• Removing the bobbin
Gently slide the hook cover release button q to the
right and remove the hook cover plate w.
Lift out the bobbin.
q Hook cover release button
w Hook cover plate
• Horizontal spool pin
Lift up the spool pin q. Place a spool of thread on the
spool pin.
Attach the large spool holder w, and press it firmly
against the spool of thread.
The small spool holder e is used with narrow or small
spools of thread.
Lower the spool pin q.
q Spool pin
w Large spool holder
e Small spool holder
• Additional spool pin
The additional spool pin q is for winding bobbins
without unthreading the machine.
Insert the additional spool pin q into the hole w.
The additional spool pin should point to the bobbin
winding tension disk e.
q Additional spool pin
w Hole for additional spool pin
e Bobbin winding tension disk
To Next Page
Loading...
