Janome 5060DC - Standard Accessories; Large Extension Table

2
q w e r
t y u i
o !0 !1 !2
!3 !4 !5 !6
!7 !8
!9
Standard Accessories
q Zigzag foot: A (set on the machine)
w Overedge foot: C
e Zipper foot: E
r Satin stitch foot: F
t Blind hem foot: G
y 1/4˝ seam foot: O
u Open toe satin foot: F2
i Automatic buttonhole foot: R
o Assorted needle set
!0 Spool holder ( X 2) (large) (1 set on the machine)
!1 Spool holder ( X 2) (small)
!2 Additional spool pin
!3 Bobbins ( X 4) (1 set on the machine)
!4 Screwdriver
!5 Lint brush
!6 Seam ripper (Buttonhole opener)
!7 Instruction book
!8 Hard cover
!9 Large extension table
Large Extension Table
• Attaching the table
Pull the table away from the machine.
Spread the legs of large extension table.
Holding the table with both hands and slide it gently to
the right.
• Adjusting the table height
Turn setscrews of the table legs with a screwdriver
(optional).