Janome 5060DC - Keyhole Buttonhole Sewing Procedure; Stretch Buttonhole Sewing Procedure; Antique Buttonhole Sewing Procedure

37
q
ew
Keyhole Buttonhole
q Stitch pattern: 19
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The sewing procedure is the same as the square
buttonhole. Use the seam ripper and an eyelet punch r
to open the buttonhole.
r Eyelet punch
The stitch density can be varied from 0.3 to 0.8
The stitch width can be varied from 5.5 to 7.0.
To change the stitch width or density, refer to page 36.
* An eyelet punch is an optional item.
r
q
ew
Stretch Buttonhole
q Stitch pattern: 20
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row first.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0.
To change the stitch width or stitch density, refer to page
36.
q
ew
Antique Buttonhole
q Stitch pattern: 21
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row first.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 2.5.
To change the stitch width or stitch density, refer to page
36.