Janome 5270QDC - Welted Buttonhole

40
Round-end and Fine Fabric Buttonhole
q Stitch pattern: MODE 2: 23 and 24
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 5.5.
The stitch density can be varied from 0.2 to 0.8.
Keyhole Buttonholes
q Stitch pattern: MODE 2: 25 - 29
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 5.5 to 7.0.
The stitch density can be varied from 0.3 to 0.8.
Use the seam ripper and an eyelet punch to open the
buttonhole.
q Eyelet punch (not provided with the machine)
q
Stretch Buttonhole and Antique Buttonhole
q Stitch pattern: MODE 2: 30 and 32
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row rst.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0 (Stretch
buttonhole), 0.5 to 2.5 (Antique buttonhole).
4
w eq
4
w eq
4
w eq
Knit Buttonhole
q Stitch pattern: MODE 2: 31
w Thread tension dial: 1 to 4
e Presser foot: Automatic buttonhole foot R
Sewing procedure is the same as square buttonhole.
The buttonhole width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.7 to 1.2.
4
w eq