Janome DKS100 SE - Buttonhole Sewing; Buttonhole Types Overview; Square Buttonhole Procedure

28
NOTE:
•Tosewthebuttonholes12to15,followthesame
procedure as buttonhole 11.
•Thebuttonholesizeisautomaticallysetbyplacing
a button in the rear of automatic buttonhole foot R.
•Thebuttonholderofthefoottakesabuttonsizeof
up to 1˝ (2.5 cm) in diameter.
•Itissometimesnecessarytochangebuttonhole
size to match certain heavy or specific materials
and threads.
•Makeatestbuttonholeonanextrapieceofthe
fabric to check your setting.
•Placethebuttononthefabricandmarkthetopand
bottom to determine the position of the buttonhole
on the fabric.
•Useinterfacingonstretchfabrics.
SquareButtonhole
q Stitch pattern: 11
w Thread tension dial: 1 to 5
e Presser foot: Automatic buttonhole foot R
Tosew
z Attach the automatic buttonhole foot R by snapping
the pin into the groove of the foot holder.
q Groove
w Pin
Buttonholes
The following 6 types of buttonholes are available.
q Squarebuttonhole
This buttonhole is widely used on medium to heavy
fabrics. The buttonhole size is automatically determined
by placing a button in the foot.
w Round-endbuttonhole
This buttonhole is used on fine to medium weight fabrics,
especially for blouses and children’s clothes.
e Keyholebuttonhole
The keyhole buttonhole is widely used on medium to
heavy fabrics. It is also suitable for larger and thicker
buttons.
r Stretchbuttonhole
This buttonhole is suitable for stretch fabrics. It can also
be used as a decorative buttonhole.
t Finefabricbuttonhole
This buttonhole is used for thicker buttons on medium
weight fabrics.
y Weltedbuttonhole
This is a template pattern for the hand sewn welted
(bound) buttonhole.
q
4
q
w
e
z
q
w
w e r t y