Janome DKS100 SE - Attaching the Knee Lifter; Stitch Chart Placement

5
e
AttachingtheKneeLifter(onlyforapplicable
model)
The knee lifter is extremely helpful when sewing applique,
patchwork and quilting since it allows you to handle the
fabric while your knee controls the presser foot.
Match the ribs on the knee lifter with the notches in the
knee lifter socket and insert the knee lifter.
q Knee lifter
w Knee lifter socket
e Notch
r Rib
StitchChart
Attach the stitch chart to the chart holder.
Insert the pin into the hole for the stitch chart as
illustrated. Be sure that the vertical line of the pin is facing
the back of the machine when inserting.
q Stitch chart
w Chart holder
e Pin
r Hole for stitch chart
t Vertical line
q
w
r
You can flip the chart to the back of the machine when it
is not in use.
q
w
r
e
NOTE:
When attaching the hard cover, always remove the
stitch chart from the machine.
t
w
Front
Back