35
⁄1
⁄2
⁄3
⁄0 The patch should be cut 1 to 1.5 cm (7/16˝ – 5/8˝)
away from the hole. The corners should be cut
rounded off as shown.
e Right side of patch
r Wrong side of garment fabric
⁄1 Place the facing on the wrong side of the garment
fabric. Mark the 4 corners with pins as shown.
y Facing
u Garment fabric
⁄2 Turn all the layers over and cut the buttonhole opening
on the facing in the same way as step c.
Four marker pins show you the corner points on the
facing. Fold back each flap between the facing and
patch.
y Facing
u Garment fabric
⁄3 Stitch around the opening with a needle and thread as
shown.
y Facing
u Garment fabric
⁄4 The welted buttonhole is complete.
⁄4
⁄0
r
e
u
y
y
u
y
u
To Next Page
Loading...
