Janome Hello kitty User Manual

15
Tricot Stitch
q
Pattern selector: D
w
Presser foot: Zigzag foot
e
Thread tension: 1–4
r
Stitch length: 0.5–4
This stitch is used to finish the raw edge on syn-
thetics and other fabrics that tend to pucker.
Place your fabric to allow a 1.6 cm (5/8") seam.
Trim the seam allowance after sewing.
Be careful not to cut the stitches.
w e
q
r
Knit Stitch
q
Pattern selector: G
w
Presser foot: Zigzag foot
e
Thread tension: 1–4
r
Stitch length: S.S.
This knit stitch is ideal for sewing swimwear and
stretch velour because it provides the greatest
amount of elasticity and strength.
Place your fabric to allow a 1.6 cm (5/8˝) seam.
Trim the seam allowance after sewing.
Be careful not to cut the stitches.
w e
q
r
SECTION IV. UTILITY STITCHING

Janome Hello kitty Specifications

General

Type	Mechanical
Stitch Count	15
Stitch Length	4mm
Stitch Width	5mm
Free Arm	Yes
Buttonhole Styles	4-Step
Presser Feet	3 (zigzag, zipper, buttonhole)