Janome Hello kitty User Manual

7
When inserting the bobbin case, place the horn
into the recess of the hook race.
e Horn
Setting Spool Pins
The spool pins are used for holding the spool of
thread in order to feed thread to the machine.
To use, pull up the spool pin. Push down for
storage.
Removing or Inserting the Bobbin Case
Open the hook cover.
q Hook cover
Raise the needle by turning the handwheel toward
you. Take out the bobbin case by holding the latch.
w
Latch
q
w
e

Janome Hello kitty Specifications

General

Type	Mechanical
Stitch Count	15
Stitch Length	4mm
Stitch Width	5mm
Free Arm	Yes
Buttonhole Styles	4-Step
Presser Feet	3 (zigzag, zipper, buttonhole)