Janome MC350E - Replacing Touch Panel

21
MC350E
F
To remove:
1. Remove the front cover. (See page 6)
2. Pull out the Connectors of Printed circuit board
“F” (Start/Stop) , LCD Harness and Inverter
connector and Touch panel connectors .
3. Remove Screws (4 pieces) and remove the
Touch panel .
To attach:
4. Place the Touch panel and press it against the
Ribs , , .
Fix the Touch panel with the Fixing plate
(bottom) while press it against the Touch panel
and tighten screws .
5. Place the Fixing plate (top) and secure it with
Screws while pressing the Fixing plate (top)
against the Touch panel .
Printed circuit board F
LCD Harness
Inverter connector
Touch panel connector
Screws
Touch panel
Rib
Rib
Rib
Fixing plate (bottom)
Fixing plate (top)
A
B
C
D
E
F
F
G
H
I
F
J
F
E
K
E
K
F
K
E
E
H
E
E
J
Replacing Touch Panel
B
A
C
E
D
C
D
A
B
G
I
G
F
H
J
I
K