9
q
e
r
y
u
Threading the Machine
• Threading the Machine
* Raise the presser foot lifter.
* Press the up/down needle position key twice to
raise the needle.
q
Up/down needle position key
w Presser foot lifter
z Draw the thread around the upper thread guide.
e
Upper thread guide
x Then, down around the check spring holder.
r
Check spring holder
c Firmly draw the thread from right to left over the
take-up lever and down into the take-up lever eye.
t
Thread take-up lever
v Then, down through the lower thread guide.
y
Lower thread guide
b Slide the thread behind the needle bar thread guide on
the left.
Thread the needle from front to back or use the needle
threader.
u
Needle bar thread guide
w
e
t
r
y
u
z
x
c
vb
t
To Next Page
Loading...
