13
• Adjusting Stitch Length Manually
When you press the stitch length key , the
pre-programmed setting (2.2) will appear on the screen.
It can be set between 0 and 5.
Press the minus mark and the number on the screen
will get smaller, and the stitch length will get shorter.
Press the plus mark and the number on the screen
will get bigger, and the stitch length will get longer.
* The reverse stitch length cannot be set longer than
2.5 mm (3/32" ).
• Variable Needle Position
When the patterns listed listed below (left) are selected and
the needle position key is pressed, you can move the
needle to any position desired.
q
Left
w Middle
e Right
01
W
3.5
L
2.2
01
W
3.5
L
2.2
L 1.0 L 2.2 L 5.0
qw e
W 0.0 W 3.5
W 7.0
01
A
26
To Next Page
Loading...
