21
Buttonhole
• Buttonhole Variations
Square Buttonhole:
For buttonholes on shirts and blouses.
Rounded Buttonhole:
For buttonholes on shirts and blouses made of fine fabric.
Keyhole Buttonhole:
For buttonholes on jackets.
Sensor Buttonhole
• Preparation for Sewing
Attach the automatic buttonhole foot R. Make sure the
groove on the holder catches the pin on the foot when
lowering the presser foot.
q
Groove
w Pin
• To Sew
z The size of buttonhole is automatically set by placing
the button in the rear of the automatic buttonhole
foot.
The button holder on the foot takes a button up to
25 mm (1" ) in diameter.
Alter the buttonhole width to match the material and
thread (see page 23).
Make a test buttonhole on an extra piece of the fabric
to check your settings.
Use interfacing on stretch fabrics.
q
R: Automatic buttonhole foot
z
q
R
15
SEN
R
15
AUT
R
15
BH2
R
15
BH3
R
15
SEN
q
w
To Next Page
Loading...
