12
Memory Mode/Buzzer Sound/Multiple
Language Settings
NORMAL / RESUMPTION Mode
[1]
Turn on the power switch while pressing the memory
key.
1 Memory key
2 Power switch
[2]Select “1” on the number key to access the
NORMAL/RESUMPTION mode.
You can select the mode by pressing the stitch width
key “+” or “-”.
* NORMAL mode - The last selected pattern setting
will not be recalled when you turn on your machine.
Machine turns on in straight stitch 01, Direct mode.
* RESUMPTION mode - The last selected pattern
setting will always be recalled when you turn on
your machine. Machine turns on in A Mode.
[3]Select the desired mode: NORMAL SET or
RESUMPTION SET.
[4]Press the Memory key.
Buzzer
[1]
Turn on the power switch while pressing the memory
key.
1 Memory key
\
\
\
\
1
2
3
4
5
6
7
[1]
[2]
[3]
[4]
[1]
[2]
[2]
[3]
2 Power switch
[2]Select “ 2 “ by pressing the number key to access the
Buzzer mode.
You can select the mode by pressing the stitch width
“+” or “-”.
[3]Select desired mode “-” SOUND ON or “+” SOUND
OFF.
[4]Press the memory key.
* The Buzzer sound setting mark will appear on the
screen when you have set it .
Language selection setting
[1]
Turn on the power switch while pressing the memory
key.
1 Memory key
2 Power switch
[2]Select “ 3 “ by pressing the number key to access
language selection settings.
You can select the desired language by pressing
stitch width “+” or “-”.
[3]Select the desired language.
3 NORMAL / RESUMPTION
4 Buzzer sound “ ON “ or “ OFF”
5 Multiple language
[4]Press Memory key.
6 NORMAL / RESUMPTION
7 Buzzer sound setting mark
To Next Page
Loading...
