Janome MEMORY CRAFT 4800 - Cycle Stitching with Mirror Image Patterns; Restarting Programmed Patterns

57
Cycle Stitching with Mirror Image Patterns
After selecting a pattern, press the Turn-over memory
key.
Press the Mode key and select A Mode.
[1]Press Mode key and select A Mode.
[2]Press stitch pattern 50.
[3]Press memory key.
[4]Press Turn-over memory (TOM) key
Restarting Programmed Patterns
After stopping in the middle of your sewing, press
memory key to return to the starting position of your
programmed stitch pattern.
1 Contents of program.
2 The position where machine is stopped.
3 Press memory key after machine is stopped.
After stopping in the middle of your sewing, press Turn-
over memory key to return to the beginning of the last
pattern sewn.
1 Contents of program.
2 The position where machine is stopped.
3 Press Turn-over memory key after machine is stopped.
[1]
[2]
[3]
[4]
1
2
3
1
2
3