Janome memory craft 4900 - BOBBIN WINDING; Bobbin Removal and Spool Setup

www.toews.com
18
Bobbin Winding
• Removing the bobbin
q Hook cover plate release button
w Hook cover plate
e Bobbin
Slide the hook cover plate release button q to the right,
and remove the cover plate w.
• Setting the spool of thread
q Spool pin
w Large spool holder
e Small spool holder
r Spool stand
Lift up the spool pin q. Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder w, and press it firmly
against the spool of thread.
q
w
e
w
q
e
q
q
w
r
The small spool holder e is used with narrow or small
spools of thread.
If the thread slips off the spool and jams around the
spool pin, use the spool stand r.
Lift out the bobbin e from the bobbin holder.
Janome Memory Craft 4900 Instruction Manual
Janome Sewing Machine 4900
www.toews.com
MC4900 Owners Manual/ User Guide