Janome memory craft 4900 - GETTING READY TO SEW; Connecting Power Supply and Controls

www.toews.com
6
To use start/stop button
Turn off the power switch, then insert the machine plug into
the machine and the power supply plug into the wall outlet.
Turn on the power switch.
GETTING READY TO SEW
Connecting the Power Supply
To use foot control
Turn off the power switch, insert the foot control plug and
machine plug into the machine, then the power supply plug
into the wall outlet in this order.
Turn on the power switch.
q Power supply cord
w Machine socket for power supply cord
e Outlet
r Power switch
t Machine socket for foot control plug
y Foot control plug
u Foot control
CAUTION
Always turn the power switch off and unplug the sewing
machine from the electrical outlet when the machine is not
in use.
NOTE:
The start/stop button cannot be used when the foot
control is connected to the machine.
q
we
r
r
q
w
e
t
y
u
Janome Memory Craft 4900 Instruction Manual
Janome Sewing Machine 4900
www.toews.com
MC4900 Owners Manual/ User Guide