49
30
Eyelet
Machine settings
q Pattern: 30 (mode 2)
w Presser foot: Satin stitch foot F
e Thread tension: AUTO
The eyelet is used for belt holes etc.
To sew
Depress the foot control to sew.
The machine will sew an eyelet and stop automatically
when completed.
Open the eyelet with an awl, punch or pointed scissors.
Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
If the eyelet gap opens, press “–“ on the stitch length
adjustment button.
If the eyelet overlaps, press “+“ on the stitch length
adjustment button.
NOTE:
The shape can be adjusted within L1 to L3 (default setting
is L2).
qw e
Janome Memory Craft 4900 Instruction Manual
Janome Sewing Machine 4900
MC4900 Owners Manual/ User Guide
To Next Page
Loading...
