EasyManua.ls Logo

Janome memory craft 4900 - DARNING TECHNIQUES; Darning Process and Size Adjustments

Janome memory craft 4900
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
To sew
c Fold back the left seam allowance. Turn the right
seam allowance under to form a 0.2 to 0.3 cm (1/8˝)
fold. Place the zipper teeth next to the fold and pin it
in place.
Set the stitch length and thread tension back to the
original setting.
q Lower fabric
w 0.2 to 0.3 cm (1/8˝) fold
e End of the opening
r Opening size
v Attach zipper foot E with the pin on the right hand
side.
Lower the foot onto the topside at the bottom of the
zipper so that the needle pierces the fabric next to
the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along
the bottom edge of the foot.
b Sew through all layers next to the fold.
Stop 5 cm (2˝) t before zipper foot E reaches the slider
on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper. Lower the foot
and stitch the remainder of the seam.
t 5 cm (2˝)
y Slider
q
e
r
w
t
y
c
v
b
Janome Memory Craft 4900 Instruction Manual
Janome Sewing Machine 4900
www.toews.com
MC4900 Owners Manual/ User Guide

Table of Contents

Related product manuals