Janome Memory Craft 6650 - Customizing Machine Settings

q
z
c
v
x
b
w
w
w
e
31
Customizing direct pattern selection
You can assign your favorite stitch pattern to the direct
pattern selection.
NOTE:
• You cannot customize the direct pattern selection if
the direct pattern reference chart is hidden. Press the
stitch display key to show the reference window q.
• You can assign the stitch patterns in mode 2 only.
Example: Register stitch pattern “023” to “4” key
z Select mode 1.
Press the memory key.
The direct pattern customize screen appears.
You can assign your favorite stitch pattern to the
numeral keys from 4 to 9 and 0.
w Memory key
x Press the desired numeral key to which you want to
assign a new stitch pattern. Select from among 4 - 9
and 0 as shown.
Press “4” key.
c Enter the stitch number of the desired stitch pattern.
Press “0”, “2” and “3” keys in order.
Press the memory key.
NOTE:
You can also select the desired pattern by turning the
jog dials or pressing the arrow keys.
v Press the memory key to assign the stitch pattern.
The stitch pattern image of the direct stitch pattern
selection changes.
b Now you can select the assigned stitch pattern (023)
by pressing the numeral key (4) when selecting mode
1.
Resetting your direct pattern selection
To reset the customized direct stitch pattern selection,
press the memory key.
Press the twin needle key and the conrmation message
appears.
Press the memory key.
The direct stitch pattern selection screen changes to the
default settings with the beep.
Press the memory key to reset the selection.
e Twin needle key
NOTE:
Be sure to press the memory key again after the beep.
Otherwise the direct pattern selection will not reset.