A
2/3
A
q
w e r
q
w
94
Reducing the size of letters
To reduce the height of character to approximately 2/3 of
its original size, select the character with the arrow key
and turn the stitch width adjusting dial counterclockwise.
The stitch width (the height of character) is set at “6.0” w.
q Arrow key
Spacing
To enter the space in monogramming, select one of
the three space icons on the lower right corner of the
monogram selection window.
q Space icons
w Small-size space
e Medium-size space
r Large-size space
To Next Page
Loading...
