Janome Memory Craft 6650 - Mirror Image Function

z
x
c
v
t
w
e
q
r
q
q
81
v Start sewing.
Once sewing has started, the cursor w appears under
the rst pattern and will shift to the right as you sew.
The information of the currently sewn pattern will be
displayed on the LCD screen e.
Combination of patterns 160, 159 and 157 will be
sewn accordingly and repeatedly.
NOTE:
• You can start sewing from the middle of the pattern
combination by using the startover key.
After programming a pattern combination, select
the stitch pattern that you want start from by
pressing the startover key and start sewing.
r Startover key
• If you press the auto-lock key in the middle of
sewing, the machine will sew to the end of the
current pattern, sew locking stitches and stop
automatically.
t Auto-lock key
PROGRAMMING A PATTERN
COMBINATION
Pattern Combination
Example:
Programming patterns 160, 159 and 157 in
mode 2.
NOTE:
• Patterns in the different groups, letters and
numbers can also be programmed.
• The maximum number of the stitch pattern that can
be registered in one pattern combination is 50.
z Select pattern 160 in mode 2 and press the memory
key.
q Memory key
x Select pattern 159 in mode 2 and press the memory
key.
c Select pattern 157 in mode 2 and press the memory
key.