Janome Memory Craft 6650 - Machine Settings - Display, Sound, and Operation; Screen Brightness and Buzzer Sound; Auto Thread Cutting and Needle Stop Position; Adjustable Start-up Speed (START;STOP key)

x
c
z
z
c
v
x
b
w
e
q
q
r
32
Pattern Selection in Mode 2 and Mode 3
• Using numeral keys
Enter the 3-digit pattern number by pressing the numeral
keys to select the desired stitch pattern.
Example: Selecting pattern 098 in mode 2
z Press the mode key to select mode 2.
q Mode key
x Press “0”, “9”, and “8” keys in order.
c The stitch pattern “098” has been selected.
• Using jog dials
You can use jog dials to select your desired patterns.
Example: Selecting pattern 098 in mode 2
z Press the mode key to select mode 2.
x Press the stitch display key and the pattern selection
window appears.
q Stitch display key
c To turn the page, turn the stitch width adjusting dial.
Turn the dial until the page 10 w appears.
v To move the cursor left or right, turn the stitch length
adjusting dial.
Turn the dial until the cursor is at the stitch pattern 098
e.
b Press the memory key to select the stitch pattern 098.
r Memory key
NOTE:
The machine accepts 3-digit numbers only.
For example, press “0”, “9” and “8” keys in order when
selecting pattern 098. Do not skip “0” and start with “9”.