Threading the Machine
.
Threading the Machine
*
Raise
the thread take-up lever to its highest
position
by turning the handwheel
counterclockwise.
*
Raise the
presser
foot lifter.
*
Place
a spool on lhe spool
pin,
with thread
coming
ofi as shown.
O
Drawthe end of thread
around the upper thread
9urqe.
@
While
holdjng the thread near the spool,
draw
the
end oi the thread down around the
check spring
holder.
O
Firmly draw the thread
up
from
right to left over
the take-up lever
and down into lhe take-up lever
eye.
@
Slide
the thread
behind the needle bar thread
guide
on the left.
O
Thread the needle from front to
back or use a
needle threader-
We recommend
using the convenient needle
threader(#200262101),
included with
your
machine.
.
Drawing
up
Bobbin Thread
O
Raise the
presser
foot. Hold the needle
thread
lightly with
your
left hand
and
rotate
handwheel
counterclockwise for one
complete
lurn.
@
Bring the
bobbin
thread
up by
pulling
the needle
thread
up.
@
Pull
both
threads
under and to the back of the
presser
foot, Ieaving
4 to 6'(10 to 15cm)
of
thread
clear.
To Next Page
Loading...
