Janome MS 2028 - Getting Ready to Sew; Pressure Adjusting Lever Function; Presser Foot Lifter Operation; Using the Built-in Thread Cutter

Connecting
Machine
to Power Supply
aD
Power supply
plug
O
outlet
€)
Machine
plug
@
Power switch
@
Machine socket
@
Light bulb
Before connecting the
power
cord, make sure lhe
voltage and frequency shown
on the machine
conform
to
your
electrical
power.
1. Turn off
the
power
switch
@.
2. Insert the machine
plug
@
into the machine
socket
@.
3. Inset
the
power
supply
plug
O)
into the outlet
@.
4. Turn the
power
switch
@
to turn on the
power
and sewing light
@.
For Your Safety
*
While in operation,
always keep
your
eye
on the
sewing area. Do
not touch any moving
parts
such
as ihe thread
lake-up lever, handwheel or
neeote.
*
Always
turn
off
the
power
switch and unplug
from
the
power
supply:
-
When leaving the machine
unattended.
-
When attaching or removing
any
parts.
-
When cleaning the machine.
*
Do not
place
anything
on the foot control,
when
not sewing.
Controlling
Sewing Speed
Sewing
speed can be
varied by the loot control.
The harder
you press
on the foot control,
the faster
the machine
runs-