Jasic MIG200PFC - Inching;Gas Check Function

Page 43
2） Read: Read the welding parameters saved in the channel and have parameters
displayed on the LCD screen.
3） Delete: Reset all parameters in the channel to the default values.
6.2.7 Inching/gas check function
In the SynMIG or MIG page of LCD screen, the user can select the option on the
operation page to enter the "Inching" or "Gas Check" function. The "Inching" or "Gas Check"
function needs to be selected by rotating and pressing the master encoder. When starting
inching or gas check, the LCD screen will display the inching or gas check animation, as
shown in the following figure:
Inching