Description and Operation
DELTA Configuration
Establishing a USB Cable Connection
25www.javad.com
Figure 1-12. Ports tab
9. Open Advanced tab, and then Multipath Reduction subtab. Activate Code multipath reduction
(
mpnew
) on base and rover for DGPS mode.
For RTK mode activate Carrier multipath reduction (
mpnew
) as well (Figure 1-13).
Figure 1-13. Multipath Reduction
10. Click Apply, to save the made changes and settings into receiver’s memory and close the dialog
window. The receiver configuration will be kept in the receiver till you will change them or will
clear NVRAM. For detailed description of settings and parameters see NetView Software Manual.
To Next Page
Loading...
