Jay electronique UD Series - UDR Receiver Configuration Options

UD - 319472K - 85 -FRENDE
3.6- UDR receiver configuration
The following parameters can be configured on the receiver :
• Transmitter button interlockings :
Factory configured or using a PC via serial link option (ref.:UDWR32) with PC
software DialogUD (ref.:UDWR36).
• Transmitter buttons / receiver function relays correspondence :
Factory configured or using a PC via serial link option (ref.:UDWR32) with PC
software DialogUD (ref.:UDWR36).
• Transmit radio frequency :
The radio reception frequency (channel No.) can be programmed in two ways:
• By the transmitter matched to the receiver implementing the transmitter
frequency programming procedure, see §3.5.2.
• By using a PC via serial link option (ref.:UDWR32) with PC software DialogUD
(ref.:UDWR36).
The receiver reception frequency (channel No.) can be read :
• By using a PC via serial link option (ref.:UDWR32) with PC software DialogUD
(ref.:UDWR36).