12
• No more pictures can be taken if the “Memory Full” message
appears on the LCD screen – replace the SD card or download
stored images into the computer.
• Make sure that your fingers do not cover the lens while recording
video or taking images.
• Do not remove the memory card or batteries when video camera is
saving the image, otherwise the data will be damaged.
Self-timer and Burst Snapshot option
If the Self-timer is set and activated, the camera will auto-take a picture
after the selected delay time.
In the Burst snapshot setting the camera will auto-take three pictures
continuously.
1: Turn the power ON and set video camera to the Capture mode.
2: Press the UP button to select the Self-Timer options; please note icons
and information displayed on left upper corner of the LCD screen.
Off: No Self-timer selected / camera takes photos without delay.
2 seconds: camera will take picture with 2 seconds delay.
To Next Page
Loading...
