JBL CSA-2120 - 2.6 Wiring Your Audio System

11
2.6 Wiring Your Audio System
Typical input and output wirings are shown in Figure 2.6.
INPUTS: Connect input wiring for both channels.
OUTPUTS: Maintain proper polarity (+/–) on output connectors.
Connect Channel 1 loudspeaker’s positive (+) lead to Channel 1 positive (+) terminal of
amp; repeat for negative (–). Repeat Channel 2 wiring as for Channel 1.
The minimum impedance one of the amplifier channels can drive is 4 Ohms. Therefore,
you can connect up to four 16 Ohms speakers, or two 8 Ohms speakers, or one 4 Ohms
speaker to each amp channel.
输入
70Hz 高通滤波
限幅
自动待机（STBY）
输入
70Hz 高通滤波
限幅
输出
输出
输入功率 50W
100-240V~50/60Hz
输入
70Hz 高通滤波
限幅
自动待机（STBY）
输入
70Hz 高通滤波
限幅
输出
输出
输入功率 50W
100-240V~50/60Hz
Figure 2.6 Wiring Audio System
Professional audio system
Personal audio system