17
Appendix B: Specifications
Output Power (two channels at 1 kHz power,
THD+N<0.5%):
4 Ohms 120 W
8 Ohms 120 W
Frequency Response (1 watt into 4 or 8 Ohms): +1/-1 dB
Load Impedance: Rated for 4 or 8 Ohms
Sensitivity (8 Ohms load): 1.4 Vrms
Signal to Noise Ratio (below rated 8-Ohm power
at 1 kHz, A weighted):
>100 dB
Crosstalk (Rated into 8 Ohms):
70 dB below rated from 20 Hz to 1 kHz;
50 dB below rated at 20 kHz
Input Impedance (nominal):
Balanced: 20 k Ohms
Unbalanced: 10 k Ohms
AC Line Voltage and Frequency Configurations
Available:
100-240 V, 50/60 Hz
Maximum Input Signal: +20 dBu typical
Auto-Standby:
Go into auto-standby: 1 hour
Recovery time: < 1 ms
Recovery threshold: -60dBu
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing)
Dimensions (W x H x D) : 8.2” x 1.7 x 7” (209 mm x 44 mm x 178 mm)
Net Weight: 1 kg (2.1 lbs)
Shipping Weight: 1.5 kg (3.4 lbs)
Appendix C: AC Power Draw and Thermal Dissipation
To Next Page
Loading...
