JBL SUB300 - BASIC SPECIFICATIONS; SUB300 Subwoofer Specifications

Note: The SUB300 is part of the SCS300.7 system
Satellite loudspeakers SCS300SAT: order JBL part# SCS300SAT-1
Center channel SCS300CEN: order JBL part# SCS200/300CEN-1
- CONTENTS -
BASIC SPECIFICATIONS……………….….….….….…………….1
DETAILED SPECIFICATIONS ……..…………….……………..2
OPERATION ………….……………………………..…………….4
CONNECTIONS..………………………..………….…….………...5
BASIC TROUBLESHOOTING…..…………….….….…….……...7
TEST SET-UP AND PROCEDURE……………………………….8
EXPLODED VIEW/PARTS LIST…………………………………..9
BLOCK DIAGRAM..…………………………………………….....10
PCB DRAWINGS………………..………………………………...11
120V ELECTRICAL PARTS LIST ………………..……………..13
230V ELECTRICAL PARTS LIST …………………..…………..16
INTEGRATED CIRCUIT/TRANSISTOR PINOUTS.................19
120V SCHEMATICS.………..………………….………. ………20
230V SCHEMATICS.………..…………………….……. ………23
PACKAGING…………………………….………………………...25
BASIC SPECIFICATIONS
SUB300 Subwoofer
Configuration: Floor-firing, bass-reflex ported enclosure
Woofer: 10" (254mm) cone
Amplifier Power output: 150W Continuous RMS power
Frequency response: 30Hz – 120Hz (-6dB)
Dimensions (including feet): 20 x 13 ¾ x 15 ¾” (508 x 349 x 400mm)
Weight: 35 lb/15.9kg
Occasional refinements may be made to existing products without notice but will always meet or exceed original
specifications unless otherwise stated
1