2-4
Opening and Closing the Door
To open the door from the outside, unlock it with the key
provided and pull the handle.
Once in the cab, close and secure the door by pulling with
the bar until the latch clicks shut. To open the door from the
inside, pull the lever to the rear.
The door can be secured in the fully open position. Swing
the door fully open until the bar on the door locates securely
in the socket on the side of the cab. To release the door
when it is secured fully open, move lever X on the left side of
the operator’s seat downward.
Opening and Closing the Front Upper
Window
!!
CAUTION
Take care when raising and lowering the window; lower
your head as you pull the window back. Isolate the
hydraulic controls before opening and closing the
window.
1 Opening
To open the front window, hold the left and right
handles A, B and depress the catches C, D with your
thumbs. Pull the handles backwards and swing the
front window upwards until it locates on the catches E,
F in the ceiling.
2 Closing
To close the front window, hold the left and right
handles A, B and depress the catches C, D with your
thumbs. Pull the handles downward and swing the front
window until it locates in the closed position.
Section 1 General Information
9803/9330
Section 1
2-4
Issue 1
Operation
To Next Page
Loading...
