JCM GEN2U - Page 14

GEN2U™ Printer
© 2016, JCM Global Corporation 14 Part No. 960-000177R_Rev. A
PRINTER CONFIGURATION (Figure 12 a)
This section displays the current Printer Configuration, including
Version, Firmware Installed and Communication Setup parameters
COMMANDS (Figure 12 b)
This section provides the following functional checks:
• Reset - Performs a reset of the Printer
• Clear - Clears Warning and Error Status
• Flush - Deletes the Firmware on the Printer
• Feed - Feeds one blank Ticket
• Print Ticket Information - Prints a Test Ticket with Printer
Information, Printer Communication Settings, Character Set
and a Test Barcode
• Get Value - Retrieves the Printer CRC information
PRINTER STATUS (Figure 12 c)
This section displays the current status of the Printer.
NOTE: Any active condition appears
highlighted in RED (Figure 12 d)
GEN2U_FlipBookRevA_v12.fm Page 14 Thursday, October 6, 2016 1:29 PM