17
Once you have adjusted the seat length, always ensure these points are
firmly fixed and are checked as part of maintenance of the chair.
When mounting the seating system to a base for the first time, or when an
adjustment has been made to the size of the system, a stability assessment
should be carried out prior to use of the equipment.
Note: The Triton Seat is Split into 2 halves (Left & Right) Follow the instructions below to
adjust the seat depth for the user. If the user has a leg length discrepancy then you can
adjust and lock off either sides of the seat at any point within their range (150mm)
• Loosen (do not remove) the allen key bolts (A) on both sides of the seat.
• Slide the seat in or out to change the length.
• Fix the position by tightening the allen key bolts securely.
Seat Depth Adjustment
!
!
A
To Next Page