23
Height & Width of Supports
• Loosen both bolts (A) using the allen key provided.
• Slide the pads up or down along the slot in the seat back (B) to adjust the height.
• Slide the pads horizontally to adjust the width.
• Re tighten the allen key bolts to secure.
Flip Away Action
(Where Fitted)
• Pull plunger (C) downwards.
• Flip the supports away to aid transfer or set up.
• When ready push the supports back in, until they lock in place.
A
B
C
Check that the supports are not too high under the arms of the user or tight
around chest area by running your fingers around the inside of the supports.
Also check that the supports do not infringe on any feeding tubes.
!
Lateral Support Adjustment
To Next Page
Loading...
Need help?
General