malfunction occurs during an autostop, the vehicle may
not auto start and will need a key start.
To activate/deactivate the system manually, push the
button on the instrument panel.
● LED off: system activated
● LED on: system deactivated
Stop/Start OFF Button
A
CTIVE SPEED LIMITER — IF E
QUIPPED
The A
ctiv
e Speed Limit
er butt
on is positioned on the
right side of the st
eering wheel.
Active Speed Limiter Button
The Active Speed Limiter will limit the vehicle maximum
speed to the set vehicle speed.
The speed limit can be set be
tween 19 mph (30 km/h)
to 80 mph (130 km/h).
NOTE:
The Active Speed Limiter can be set with the vehicle
stationary or in motion.
Set the Active Speed Limiter to standby by pressing the
setting button on the steering wheel; the Active Speed
Limiter will turn to standby and the white indicator light
will appear in the instrument cluster.
NOTE:
The Cruise Contr
ol (if equipped) will be deactivated
when the Active Speed Limiter is turned to standb
y
mode.
ACTIVATION
To activate the feature, push the Active Speed Limiter
button located on the right side of the steering wheel. A
message will appear along with an indicator light in the
instrument cluster display to signal that Active Speed
Limiter has been activated.
After the Active Speed Limiter on/off button has been
pushed, you must press the SET (+) or SET (–) button to
set the target speed (or the RES (resume) button when
there is already a previously set target).
Push the SET (+) or SET (–) button to raise and
lower the target speed to the desired value. Pushing
and holding down the SET (+) or SET (–) button will
increase/decrease the speed value by increments of 5
mph (5 km/h).
Each time the Active Speed Limiter is activated, pushing
the RES (resume) button will set the target speed to the
last programmed value from the previous activation.
132 STARTING AND OPERATING
To Next Page
Loading...
