Jeep Compass 2025 - Memory Position Recall; Manual Front Seat Forward;Rearward Adjustment

4. Push and release the lock button on the key fob
within 10 seconds.
NOTE:
Your key fob cannot be unlinked from your memory
settings. To change the memory settings, overwrite the
set memory programmed to the key fob by following the
previously described steps.
MEMORY POSITION RECALL
NOTE:
The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is
not in PARK, a message will display in the instrument
cluster display.
To recall the memory settings for driver one or two,
push the desired memory button number (1 or 2) or
the unlock button on the key fob linked to the desired
memory position.
If equipped, you can modify Driver 1 or Driver 2 recall
profiles in the “Memory Seats” section located within
the Personal Settings menu in the Uconnect Settings.
A recall can be canceled by pushing any of the
memory buttons (S, 1, or 2) during a recall. When a
recall is canceled, the driver seat will stop moving. A
delay of one second will occur before another recall
can be selected.
SEATS
Seats are a part of the Occupant Restraint system of
the vehicle.
WARNING!
● It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.
● Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts. In a collision, people riding in these areas
are more likely to be seriously injured or killed.
● Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
MANUAL ADJUSTMENT (FRONT SEATS
) — IF
EQUIPPED
Manual Front Seat Forward/Rearward
Adjustment
Some models may be equipped with manual front
seats. The seats can be adjusted forward or rearward
by using a bar located by the front of the seat cushion,
near the floor.
Front Seat Adjustment
While sitting in the seat, lift up on the bar and move
the seat forward or rearwar
d. Release the bar once you
have reached the desired position. Then, using body
GETTING TO KNOW YOUR VEHICLE 33