DRIVER MEMORY SETTINGS — IF
EQUIPPED
This feature allows the driver to store up to two different
memory profiles for easy recall through a memory
switch. Each memory profile saves a desired driver seat
position setting. After the driver profiles are set, they
can be viewed in the Uconnect Settings
ð
page 153.
NOTE:
Your vehicle is equipped with two key fobs, each can be
linked to either memory position 1 or 2.
The memory settings switch is located on the driver’s
door trim panel. The switch consists of three buttons:
● The set (S) button, which is used to activate the
memory save function.
● The (1) and (2) buttons which are used to recall
either of two saved memory profiles.
Memory Settings Switch
PROGRAMMING THE MEMORY FEATURE
To create a ne
w memory profile, perform the following:
NOTE:
Saving a new memory profile will erase an existing
profile from memory.
1. Place the vehicle’s ignition in the ON position.
2. Adjust all memory profile settings to desired
preferences (i.e., seat presets).
3. Push the set (S) button on the memory switch,
and then push the desired memory button (1 or 2)
within five seconds. The instrument cluster display
will indicate which memory position is being set.
NOTE:
Memory profiles can be set without the v
ehicle in PARK,
but the vehicle must be in PARK to recall a memory
profile.
LINKING AND UNLINKING THE REMOTE
KEYLESS ENTRY KEY FOB TO MEMORY
Your remote keyless entry key fob can be programmed
to recall one of two saved memory profiles.
NOTE:
Before programming your key fob you must select the
“Memory Linked To FOB” feature through the Uconnect
Settings
ð
page 153.
To program your key fob, perform the following:
1. Place the vehicle’s ignition in the OFF position.
2. Select the desired memory profile (1) or (2).
3. Push and release the set (S) button on the memory
switch, then within five seconds push and release
the button labeled (1) or (2) accordingly. “Memory
Profile Set” (1 or 2) will display in the instrument
cluster display.
32 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
