PARKSENSE SENSORS
The four ParkSense sensors, located in the rear fascia/
bumper, monit
or the area behind the vehicle that is
within the sensors’ field of view. The sensors can detect
obstacles from approximately 12 inches (30 cm) up to
79 inches (200 cm) from the rear fascia/bumper in
the horizontal direction, depending on the location, type
and orientation of the obstacle.
PARKSENSE WARNING DISPLAY
The ParkSense Warning screen will only be displayed
if “Sound and Display” is selected from the Customer -
Programmable Features section of the Uconnect system
ð
page 153.
The ParkSense Warning screen is located within the
instrument cluster display
ð
page 8
4. It provides
visual warnings to indicate the distance between the
rear fascia/bumper and the detected obstacle.
PARKSENSE DISPLAY
When the vehicle is in REVERSE, the instrument cluster
display will show the park assist system status.
The system will indicate a detected obstacle by showing
a single arc in one or more regions based on the
obstacle’s distance and location relative to the vehicle.
If an obstacle is detected in the center rear region, the
display will show a single solid arc in the center rear
region. As the vehicle moves closer to the obstacle, the
display will show the single arc moving closer to the
vehicle and the audible chime increases as the objects
get close to the vehicle.
If an obstacle is detected in the left and/or right rear
region, the display will show a single flashing arc in
the left and/or right rear region. As the vehicle moves
closer to the obstacle, the display will show the single
arc moving closer to the vehicle and the audible chime
increases as the objects get close to the vehicle.
136 STARTING AND OPERATING
To Next Page
Loading...
