Folding Exterior Mirror
POWER ADJUSTMENT MIRRORS
The po
wer mirror control switch is located on the
driver's side door trim panel.
To adjust a mirror, rotate the control switch to the mirror
you want to adjust (L) or (R). Then push the switch in
the direction that you want the mirror to move.
Power Mirror Switch
1 — Neutral Position
2 — Left Mirror
3 — Control Switch
4 — Right Mirror
5 — Power Folding Position (If Equipped)
NOTE:
Once adjustment is com
ple
t
e, r
o
tat
e the knob t
o the
neutral position t
o pre
v
ent accidental movements.
Power Folding — If Equipped
To fold the door mirrors in using the Power Folding
Mirror function, rotate the control switch to the power
folding position. Rotating the control to the left, right,
or neutral position will return the mirrors to the driving
position.
If the po
w
er mirr
or contr
ol switch is mo
v
ed again during
door mirr
or f
olding (fr
om closed t
o open position and
vice versa), the movement direction is reversed.
Power mirror position can be saved as part of the Driver
Memory Settings (if equipped)
ð
page 32.
AUTOMATIC POWER FOLDING MIRRORS — IF
EQUIPPED
When enabled within Uconnect Settings
ð
page 153,
the exterior mirrors will automatically fold when the
vehicle’s ignition is placed in the OFF position, and after
the doors are locked and closed.
The exterior mirrors will auto-fold in the following
situations after the ignition is placed in the OFF
position:
● Pushing the lock button on the door panel before the
door is opened.
NOTE:
If the doors are already locked, push the lock button
again.
● Opening the door, then pushing the lock button on
the door panel, followed by closing the door.
GETTING TO KNOW YOUR VEHICLE 41
To Next Page
Loading...
