NOTE:
The head restraints should only be removed by qualified
technicians, for service purposes only. If either of the
head restraints require removal, see an authorized
dealer.
WARNING!
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants.
MIRRORS
INSIDE REARVIEW MIRROR
Manual Mirror — If Equipped
This is a single ball joint mirror that fixes to the
windshield with a counter clockwise rotation. No tools
are needed for mounting. The rearview mirror can be
adjusted left and right, or tilted up and down. The mirror
should be adjusted to center on the view through the
rear window.
Headlight glare from vehicles behind you can be
reduced by moving the small control under the mirror
to the night position (toward the rear of the vehicle). The
mirror should be adjusted while set in the day position
(toward the windshield).
Adjusting Rearview Mirror
Automatic Dimming Mirror — If Equipped
This is a single ball joint mirror that fixes to the
windshield butt
on with a counter clockwise rotation. No
tools are needed for mounting. The rearview mirror can
be adjusted left and right, or tilted up and down. The
mirror should be adjusted to center on the view through
the rear window.
This mirror automatically adjusts for headlight glare
from vehicles behind you.
NOTE:
The A
utomatic Dimming Mirror feature is disabled when
the vehicle is in REVERSE to improv
e the driver’s rear
view. If your vehicle is equipped with an on/off button
on the mirror, the mirror will be defaulted to on and can
be turned on/off through the touchscreen.
You can turn the Automatic Dimming Mirror feature on
or off by pushing the button at the base of the mirror (if
equipped). If your vehicle is not equipped with an on/off
button, the auto dimming feature is always on or has
the ability to be turned on/off through the touchscreen.
Automatic Dimming Button
GETTING TO KNOW YOUR VEHICLE 39
To Next Page
Loading...
